| Customization: | Available |
|---|---|
| Connection Form: | Bolt Connection |
| Certificationteel St: | ISO, CE, SGS |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Large-scale Modern Intelligent Steel Structure Workshop Office Building
Product features of steel structure workshop office building:
1. The factory area is made of steel structure, which has the characteristics of short processing cycle, convenient transportation and quick installation, so that customers can put it into use in a short time and get profits in advance;
2. The workshop adopts the modern design concept, the horizontal plate plus the design of parapet, so that the appearance is simple and generous, endowed with modern atmosphere;
3. The office area adopts steel concrete structure, adding a unique modeling design, both practical at the same time, appears solemn atmosphere!
To build
Embedded parts
(Can stabilize the plant structure)
pillars
Usually H-shaped steel, or C-shaped steel (usually connected by Angle steel)
beam
C and H beams are generally used (the height of the middle layer depends on the span of the beam).
rod
They're usually C-shaped, but they're also channel steel.
watts
There are two kinds, the first is a single tile (color steel tile). The second is composite board (polystyrene, rock wool, polyurethane). (Two layers of tile between the foam to warm in winter and cool in summer, but also has the effect of sound insulation).
Construction scheme
Steel structure plant construction scheme (partial frame) content introduction
A, steel structure installation procedures
Installation of steel columns → installation of support between columns → temporary installation of steel crane beams → correction and fixing of roof beams and roof supports → installation of maintenance structures. The installation process is as follows:
Two, steel column installation
(1) Due to the large weight and length of the steel column, it is impossible to make and transport the steel column at one time, so the method of making the steel column in sections, assembling it on site as a whole and then lifting it is planned to be divided into two sections. The steel column is transported to the site in two sections: the lower lattice part and the upper H-shaped steel column. The weight of the steel column is about 6 tons, and the height of the column is about 17 meters. The lifting demand can be met by using a 50-ton truck crane, which is supplemented by a 25-ton truck crane.
(2) Single-machine rotary lifting is adopted for lifting. Before lifting, place wooden squares on the steel column footboards to avoid damage to the steel column footboards during lifting. When lifting the steel column, the crane should hook and turn the arm at the same time to make the steel column vertical off the ground and put the column into the mouth of the cup.
){kind=link}